Products

Home Products Fiber Laser Cutting Machine Plate and Tube Laser Cutting Machine Details

Plate and Tube Fiber Laser Cutting Machine

Model:EK-3015T
Working area:5x10ft
Power:2000w 3000w 5000w
Fiber laser cutting machine 3015 is used to cut various metal materials,its maximum cutting range is 3000mm*1500mm,and the cutting thickness depends on different power and materials.

Send Inquiry

Features

Machine Features

This is a dual-use fiber laser cutting machine. It can cut both metal sheets and tubes, realizing two functions in one machine. Besides, the two worktables also help increase the working efficiency by 50%.

Applicable industries

The plate and tube fiber laser cutting machine is suitable for metal cutting with Stainless Steel, Alloy Steel Plate, Spring Steel, Iron Plate, Galvanized Sheet, Aluminum Plate, Copper Sheet, Bronze Plate, Metal Sheet, Tubes and Pipes, etc.
Different cutting thickness depends on different laser power selections in sheet metal laser cutting machines.

Details of Plate and tube fiber laser cutting machine

High-quality square tube welding and three-pass welding processes are adopted. which are sturdy and durable.

The laser head is designed for high-performance cutting in industrial applications. This intelligent laser head is designed to consistently monitor temperature, humidity, pressure,e and more.

Direct control of all the fiber laser functions: High-speed perforation, more than 100,000 hours work-life of pumped diode, almost free maintenance.

Pneumatic chucks

The special support frame can avoid the sagging deformation of the pipe, improve the cutting accuracy, and prolong the service life of the chuck.

Cypcut control system

Support angle steel, and channel steel cutting.Support to set separate corner craft.Real-time alarm and protection.

Servo Motor

The fiber laser machine adopts the imported servo system from Japan Yaskawa servo driver. The quality isy very high and stable performance.

Auto oil lubrication system

After using some time, Rack & Pinion and guide rails always need to be maintained by injecting oils. Make sure the machine keeps moving fluently and with good precision.

Specification of Plate and tube fiber laser cutting machine

Model Type	EK-3015	EK-4015	EK-4020	EK-6020
Cutting Width	1500×3000mm	1500×4000mm	2000×4000mm	2000×6000mm
Laser Media	Fiber Laser
Power	1kw 2kw 3kw 4kw 5kw 6kw
Min. Route Width	0.01mm
Reposition Accuracy	±0.05mm
Wave Length	1080nm
Aiming Positioning	Red Dot
Voltage Requirement	220V or 380V / 50Hz~60Hz
Linear Rail	Taiwan Lapping/Japan THK(optional)
Reducer	Japan Shimpo
Laser Source	RAYCUS/MAX/IPG(optional)
Cutting Head	WSX/Raytools
Servo System	France Schneider AC Servo System
Control System	Cypcut/Weihong NC Studio
Pipe Length	6m/9m/12m(optional)
Pipe Diameter	Φ10mm~220mm/320mm(optional)

cutting parameter

Packing & Shipping

Laser cutting machine completely covered with protective film,wooden boxes and pallets made of fumigation-free plywood,secured with iron straps for safe transport.