Blog

Maintenance cycle of engraving machine

‌The maintenance cycle of engraving machines is usually divided into daily maintenance, weekly maintenance, monthly maintenance and annual maintenance‌.

‌Daily maintenance‌: Before and after using the equipment every day, the equipment should be fully inspected, including power supply, cooling system, optical components, etc. At the same time, clean the dust and debris on the surface of the equipment to ensure the normal operation of the equipment‌.
‌Weekly maintenance‌: Deeply clean the equipment once a week to clean the dust and dirt inside the equipment. Check whether the various parts of the equipment are tight. If they are loose, tighten them in time‌.
‌Monthly maintenance‌: Perform a comprehensive inspection of the equipment once a month, including mechanical parts, electrical systems, optical components, etc. Replace severely worn parts to ensure stable equipment performance‌.
‌Annual maintenance‌: Overhaul the equipment once a year, and conduct a comprehensive inspection and maintenance of the equipment. Clean, lubricate and replace various parts of the equipment to ensure the normal operation of the equipment in the next year.
Specific maintenance steps and methods ‌Cleaning the body‌: Wipe the surface of the equipment with a soft cloth to clean dust and dirt. Avoid using chemical cleaners to avoid damage to the equipment.
‌Check optical components‌: Check whether the laser tube, reflector, focusing lens and other optical components are clean and undamaged. If there is dirt or damage, clean or replace them in time.
‌Lubricate mechanical parts‌: Lubricate the mechanical parts of the equipment to ensure smooth and unobstructed operation of the equipment. Use special lubricants to avoid using inappropriate lubricants to damage the equipment.
‌Clean the cooling system‌: Change the cooling water regularly to prevent the water temperature from being too high. Ensure the normal operation of the cooling system to avoid damage to the spindle motor due to lack of water or high water temperature.
‌Lubricate the transmission system‌: Lubricate the XYZ axes of the transmission system every week to ensure the flexibility of the transmission system.

You Might Also Like

Send Inquiry